|
|
|
|
| Links: Home
/ Shower Pumps & Saniflo Waste Pumps
|
 Salamander Shower Bathroom & House Pumps |
CONTRACT economy shower pumps
RIGHT pumps suitable for a shower, the whole bathroom or the whole house.
PEARL regenerative twin pumps for showers or single pumps for domestic appliances
ESPCPV pumps for electronic control and protection, ideal for loft conversions
|
|
See Salamander brochure
Salamander Brochure
The Salamander range features
pumps that boost the tank-fed
Hot and Cold water services to
baths, basins and showers in any
domestic system.
All pumps are strong, durable and
user friendly. The Salamander
flagship pumps enjoy the
security and protection of ESP –
electronic sensor protection.
This technologically advanced
and sophisticated heart has been
created especially by Salamander
and can be found in our top of
the range pumps such as the
ESP 100 CPVtwin
All Salamander pumps are designed
and engineered to ensure a long and
maintenance free life. Every pump is
individually tested for safety,
performance and quality of
workmanship.
Applications
All Salamander pumps are designed
to boost low pressure Hot and Cold
supplies from tank-fed services.
When supplies from a water heater
or a combination boiler are to be
boosted contact the Salamander
PumpWise* Helpline (0870 855 4200)
for guidance.
Voltage
220-240 volts 50 Hz
Motor type
Capacitor start and run induction type
motor with stainless steel shaft and
in-built resetting thermal protection
(complies with BS5000 part 11).
Pump materials
All moulded components are
manufactured from WRAS approved
Acetal Copolymer and Glass Coupled
Polypropolene.
Inlet pressures (maximum)
ESP 50 CPV15 feet head (1/2 Bar).
All other Right Pumps 30 feet head
(1 Bar).
CT50/75 and New Pearl 50 feet head
(11/2Bar).
AVcouplers
All Salamander AVcouplers are
3/4' BSP Fl x 22mm PushFit with built-in
isolating valves except those for
RSP 50, RGP 40, NP 50 and NP 55
which are 15mm PushFit.
The AVcouplers supplied with the
CT50/85/75 DO NOT HAVE built-in
isolating valves.
Mechanical seals
Rotary mechanical face seals comprise
a carbon rotary element and a ceramic
counter face. This combination is
resistant to mineral deposits and to
abrasion.
Connections
3/4' BSP Male.
Initiation
ESP CPVpumps are fully automatic
for both positive and negative head
systems. All other pumps require a
natural flow of at least 1 litre per
minute from a hot or cold outlet for
automatic operation in positive
head systems.
Temperature
Maximum fluid temperature 60-65º C.
ESP CPVpumps will automatically stop
running if the hot water temperature
exceeds acceptable limits.
Electrical rating
Single Pumps – TEFC continuous.
Twin pumps continuous at 20ºC 230v
except CT 75 and NP 75 which are
30 mins on/off, and RHP 140 and
ESP 140 CPVwhich are 20mins on/off.
All Salamander pumps are fitted with a
mains lead and an appropriately fused
moulded 3-pin plug.
Incorrect installation may invalidate
the pump warranty.
Salamander operate a policy of
continuous development and reserves
the right to change any of the
specifications of its products without
prior notice. All information, data and
illustrations given may be
subject to variation.
The CE Mark is affixed to all pumps and
to the packing. A copy of the declaration
of conformity is incorporated in the
PumpWise manual, which is supplied
with all Salamander pumps.
|
|
Email us anytime
....... All prices include VAT
|
|
